Echo Audio MiaMIDI Owner's Manual download pdf (Page 14)

Installation – all products

or, more simply, by touching your bare hand to the metal casing of the

computer’s power supply. (For this latter method to work, the computer must be

plugged in, though not turned on.) After you’ve discharged your static, unplug

the computer before proceeding to the next step.

6. Remove the card from its protective anti-static bag. Handle the card carefully by

its edges, and insert it into the selected expansion slot. Insure that the card’s

edge connector (the protruding edge with the gold leads) is seated firmly into the

slot. Centering the card over the slot and using a gentle rocking motion while

pushing downward into the slot generally works well. Be careful not to force the

card into the slot, or bend or twist it while it is being inserted, as this could result

in the card being damaged.

7. Now use the screw that you removed earlier, from the protective back plate, to

attach the metal bracket on the card to the computer’s rear panel.

8. OPTIONAL: (If you have Mia or MiaMIDI, skip this step.) An Esync cable

comes with Gina24, and can be used to daisy chain several 24-bit Echo cards

together. Esync is a proprietary form of super clock that allows you to sync

together multiple 24-bit Echo products. Simply attach the Esync cable to the

two-prong “Esync Out” connector on the Layla24/Gina24 PCI card, and attach

the other end to the “Esync In” connector on your Gina24 PCI card.

9. Replace the computer’s cover, and secure it. Reattach its power supply cord

and reconnect any peripherals that you may have removed prior to beginning the

installation.

10. (Layla24 and Gina24 only) Locate the audio interface box (Layla24 and

Gina24), the interface cable, and the power cable. Securely mount the interface

into your equipment rack (Layla24 only). If you will not be mounting the box in

a rack, remove the backing from the four rubber feet and place one in each

bottom corner of the interface unit. Then be sure to locate the rack-mount box in

a secure location.

Plug one end of the cable into the connector on the Echo PCI card that now

protrudes through the back panel of your computer, and secure the cable using

the built-in screws located on both sides of the connector. Attach the other end

Installation – all products

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 109 110

No comments

Echo Audio MiaMIDI Owner's Manual Page 14