Echo Audio MiaMIDI Owner's Manual download pdf (Page 52)

VxD console – Gina24 and Layla24

Instead of level meters, each monitor control has a series of

numbered buttons. These buttons allow you to select which output

channel pair controls are displayed, so you can adjust them.

The monitors are one of the most powerful functions of the

console. When you are recording, these controls allow you to set

the level at which each input signal will be monitored at each of

the outputs, independent of the main output level control.

When setting a monitor level, you must first select the input that

will be monitored, and then select the output for which you will set

the monitor level. Selection of the input is really just a matter of using the correct

monitor control box. A monitor setting will always affect the input pair that is

directly above it. To set the monitor for inputs 1/2, for example, simply go to the

monitor control directly below inputs 1/2 and click on one of the buttons found in

the center of the control.

Let’s say you want to set the level at which input pair 1/2 is monitored for each of

the four stereo analog output pairs on Layla24. You would first find the monitor

control that corresponds to inputs 1/2 (the control on the far left, directly below the

input control for channels 1/2). Clicking on the button within this box labeled “1”

causes the control box to display the currently selected levels at which inputs 1/2

are being monitored at outputs 1/2. Clicking on the button labeled “3” would

cause the control box to display the currently selected levels at which inputs 1/2

were being monitored at outputs 3/4. You can move through the remaining

buttons, setting the level at which inputs 1/2 are monitored at each of the four

output pairs, as well as the S/PDIF “D” and ADAT “A#” outputs. The console

program remembers any settings that you make, and all settings for all outputs are

maintained independently.

Note: You cannot monitor the S/PDIF inputs through the ADAT outputs and vice

versa (Layla24 and Gina24). This is because you can only use one digital mode

(S/PDIF or ADAT) at any given time. For more information, please see the section

“Digital Mode Switch” later in this manual.

VxD console – Gina24 and Layla24

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 109 110

No comments

Echo Audio MiaMIDI Owner's Manual Page 52