Echo Audio MiaMIDI Owner's Manual download pdf (Page 15)

Installation – all products

of the cable to the connector on the rear of the interface labeled computer and

fasten the cable securely with the screws. Plug the power cable firmly into the

interface and a power socket, but do not turn on the interface at this time

(Layla24 only).

Caution: Never connect the rack-mount interface to the computer while either

the interface or your computer is turned on.

11. (MiaMIDI only) Now that MiaMIDI is plugged into your computer, you will

need to connect the MIDI-S/PDIF breakout cable to the back of the MiaMIDI

card. Take the breakout cable and plug it into the 7-pin DIN connector labeled

MIDI S/PDIF at the bottom of the PCI card bracket.

12. You can now attach external audio devices to the connectors. Information on

attaching external devices to your particular interface may be found in the

following sections.

13. (Layla24 only) Turn on your Layla24 audio interface box.

14. Turn on your computer. Once Windows starts, it should find new hardware

and begin to install the drivers. For most versions of Windows, this process is

entirely automatic. For Windows XP, you should select the option “Install the

software automatically,” and follow the on-screen directions.

Note: This version of the WDM driver has not been digitally signed by

Microsoft; for Windows 2000 and XP, you will need to confirm that you

want to install an unsigned driver.

Installation – all products

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 109 110

No comments

Echo Audio MiaMIDI Owner's Manual Page 15