Echo Audio MiaMIDI Owner's Manual download pdf (Page 19)

Audio connections – Layla24

The Computer Connector

Next to the analog inputs and outputs is a connector labeled COMPUTER. This

connector is known as a DB-9, and is similar to the serial port on a PC. It is the

point at which the audio interface connects to the Layla24 PCI card inside your

computer.

A cable was supplied with your Layla24 for this purpose. This custom made cable

is manufactured to certain specifications; if you need to replace it, you should only

use a replacement cable from Echo.

ADAT / S/PDIF Optical I/O

Next to the COMPUTER connector is a pair of connectors labeled OPTICAL, IN

and OUT. These connectors are used to transmit digital audio data among via an

optical signal.

You can use this port for ADAT (8 channels) or for optical S/PDIF (stereo) I/O.

Note: Layla24 is only capable of transmitting or receiving one type of

digital signal at a time. You must choose either ADAT optical or S/PDIF

(optical or RCA); you cannot use both simultaneously. The Digital Mode

Switch can be found in the Layla24 Console. For more information, refer to

the section of the manual that discusses the console.

Audio connections – Layla24

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 109 110

No comments

Echo Audio MiaMIDI Owner's Manual Page 19